January 25, 2012

KEE Ketone Ethylene Ester Membrane

When it comes to release-ply roofing membranes, it is hard to beat (KEE) ketone ethylene ester membrane.  The use of (KEE) ketone ethylene ester membrane has been gaining popularity in Southern California because of its fantastic waterproofing safeguard and lightweight design.

(KEE) ketone ethylene ester membrane is a lightweight, release-ply vinyl that is extremely simple to install.  Most types of manufactured (KEE) ketone ethylene ester membrane materials require the contractor to install the membrane using simple hot air bonding techniques.  This hot air bonding makes a seamless molecular bond between each sheet of membrane.

Because (KEE) ketone ethylene ester membrane is a specially designed vinyl that requires no torching or adhesives to install, these roofing materials are simple to repair.  The membrane also ruins highly flexible with age, building it simple to uncover the substructure for repairs.  If a roof made of (KEE) ketone ethylene ester membrane ever needs to be repaired, the contractor simply has to place a patch over the repair area and use hot air to bond the patch to the rest of the membrane.

A further fantastic advantage to (KEE) ketone ethylene ester membrane is that it can used to replace some types of built up roofs lacking having to tear off the ancient roof.  The contractor can simply lay the new vinyl release-ply membrane over the existing roof and bond the sheets together.  This is a fantastic option for some types of ancient buildings where the existing roof would be hard to remove lacking causing hurt to the substructure.

The best use for (KEE) ketone ethylene ester membrane is on roofs that have a lot of variation in the decking substructure.  The membrane can be laid down over uneven substructures and bonded together to provide fantastic safeguard against water leaks.

EPDM Membrane

An EPDM membrane is the only type of roofing material recommended for use in water collection systems.  EPMD rubber or ethylene propylene diene M-class rubber is one of the few types of rubber that can be used for roofing projects where it is vital that the water runoff is not polluted.

When setting up most types of green roof projects, a layer of EPDM membrane will be installed to assemble any rainwater for use on the green roof.  Whether someone wants to assemble rainwater for a green roof or to water harvest for other uses, it is vital that the system be designed with an EPDM membrane in mind, especially if the collected water will be used for plant or creature use.

EPDM membrane roofing is installed using a special type of adhesive that is also designed to prevent water contamination.  These adhesives are either applied as a tape that sticks two sheets of EPDM membrane together or as a liquid that bonds the two sheets together on a molecular level

When repairing an EPDM membrane roof there is no need for heavy tools or equipment.  All the tools de rigueur for a simple repair are some common cleaning tools, a replacement patch, and some adhesive.  Simply clean the area that needs to be repaired to remove any dirt, apply the adhesive, and place the patch over the hurt area.

Of all of the types of roofing materials available, an EPDM membrane might have some of the best features.  Not only can the water runoff be collected for other uses, but an EPDM membrane can withstand all sorts of extreme weather.  High wind and hot temperatures are not a problem for an EPDM membrane roof.  Only temperatures of -45 degrees can cause potential problems, but these temperatures are nearly to no avail of in Southern California.  As far as safeguard from sun hurt and aging goes, there is no better product on the market.

Single Ply Rubber Roofing

Release ply roofing is quick becoming the premier roof replacement product of choice for commercial buildings within California.  Installation of all types of release ply roofing systems including EPDM, TPO, PVC, and KEE membranes that meet California Energy Standards and deliver the highest reflectivity with an bonus coating.

 

Commercial Roofing

The category “commercial roofing” is not always specific to commercial buildings, but is more common to a type of building.  Commercial roofing is sometimes just a term used to describe a type of roof construction that uses techniques that are common on building that have commercial uses.  These techniques can include those used on flat roofs as well as roofs with a pitch designed to shed water.  In most cases, commercial buildings have flat roofs that need specific materials or special types of work to prevent leaks.

Historically speaking, the most common type of flat roof was constructed using tar and gravel.  The roofers would place down a layer of hot tar and cover it with gravel.  As the tar cooled, it would harden and the roofers would then place several more layers of tar and gravel.  These techniques are still in use today, but the materials used are more advanced.  Now, the materials used include all from tar paper to specially designed spray-on foams and polyurethane membranes.

Some of the new roofing materials that include various types of materials for commercial roofing applications use composite materials that not only last longer, but will help to reduce utility expenditure with added insulation and heat reflection.  These materials require a roofer to use a variety of methods and have extensive knowledge in a plethora of different skill sets.  Commercial roofing in today’s environmentally friendly atmosphere is best done by those in the affair that know all of the new innovations in roof construction.

A lot of new architectural designs incorporate commercial roofing application, whether the building is used for commercial purposes or not.  In Southern California it is best to consult an experienced roofer that knows what types of roofing materials are best for a particular type of roof construction.